| Symbol | c1 |
|---|---|
| Unit | - |
| Attribute-ID | iso_6336_part_4_material_exposure_calibration_factor |
| Numeric ID | 13284 |
| Value Type | PMDouble |
The calibration factor c1 was derived from a detailed comparison between the calculation results of a high-quality calculation method and the determination of the material exposure according to method B.
For case-hardened steels, c1 assumes a value of 0.04.
Further values are not specified in ISO 6336-4.
When "acc. to ISO 6336 Part 4“ is selected and a case-hardened material is specified, a value of c1 = 0.04 is used. Alternatively, the value can be directly specified.
Source: ISO 6336-4, Section 5.3
Also see: Witzig, J.: Flank Breakage - A Limitation of the Gear Load Capacity Beyond the Material Depth, doctoral thesis, TU Munich 2012