Calculation of the transmission deviation in quasi-static cases (speed n = 0)
- Transmission deviation
- Average transmission deviation
The calculated average value of the transmission deviation profile across the tooth mesh. This value can be used to evaluate the gearing vibration.
- Maximum transmission deviation
The total amplitude of the transmission deviation profile across the tooth mesh. This value can be used to evaluate the gearing vibration.
- Effective total contact ratio
The effective total contact ratio of a mesh increases with the load. This is especially noticeable with modified gears - the tooth flank does not appear to be in the supporting area under partial load, but gradually comes into the mesh as the load increases.
Calculation of the force excitation of a gear at infinite speed (speed n = ∞)
- Meshing force
- Excitation amplitude level
The excitation amplitude level is determined from the tooth force amplitudes by the formation of levels. The result is a spectrum of excitation amplitude levels, in which the orders in the spectrum correspond to the gear mesh frequency fz. The individual orders of the excitation amplitude levels are also considered as a function of the torque. In this way, the excitation of a gear can be optimized for a specific torque range.
- Tooth load level/excitation level
- Average force excitation
The average force excitation is calculated as the average value of the course of the transmission deviation across the engagement. This value can be used to evaluate the gearing vibration.
- Maximum force excitation
The maximum force excitation is the total amplitude of the course of the transmission deviation across the engagement. This value can be used to evaluate the gearing vibration.
Calculation of the mesh stiffness
Calculation of the average form error
The calculation is based on FVA research project 338.