| Symbol | XW |
|---|---|
| Unit | - |
| Attribute-ID | iso_10300_20_structure_factor |
| Numeric ID | 200773 |
| Value Type | PMDouble |
The structure factor XW is used to describe the influence of the microstructure on the scuffing load capacity according to ISO 10300 part 20; see the following table:
| Material | XW |
| Through-hardened steel | 1.0 |
| Phosphate-coated steel* | 1.25 |
| Copper-coated steel* | 1.5 |
| Bath or gas-nitrided steel | 1.5 |
| Hardened carburized steel, with lower than average austenite content | 1.15 |
| Hardened carburized steel, with average austenite content (10 % to 20 %) | 1.0 |
| Hardened carburized steel, with greater than average austenite content | 0.85 |
| Austenite steel (stainless steel) | 0.45 |
* Values for phosphate- and copper-coated steels are valid for non run-in surfaces.