| Symbol | KHβ |
|---|---|
| Unit | - |
| Attribute-ID | iso 6336 face load factor hbeta |
| Numeric ID | 2222 |
| Value Type | PMDouble |
The face load factor KHβ describes the effect of the increase of the local load on the flank pressure due to uneven load distribution across the face width.
KHβ can be determined several different ways:
The force distribution can be determined via measurement of the root load on the gear, on the loaded gearbox at operating temperature, or critical analysis (e.g., using the pinion modification in the Workbench).
Uses the face load factor KHβ determined from the gear deformations based on ISO 6336:2006 part 1 Annex E. First, the shaft-bearing-system is solved, and the resulting value for KHβ is used for the calculation of the load carrying capacity.
The KHß value determined from the deformations in the system calculation is overlaid with a tolerance range derived from the gear quality and an additional multiplication factor that can be specified under the "control parameters" tab for the gear unit.
The effective tooth trace deviation FβX, for example from measurements, can be specified here.
This method takes into account portions of the tooth trace deviation caused by the manufacturing deviation as well as from deformation of the pinion (as with Method C2 from DIN 3990:1987 Part 1).
The conditions and simplifications for using Method C are described in ISO 6336:2006 Part 1.