| Symbol | hc |
|---|---|
| Unit | mm |
| Attribute-ID | height of pitch point over deepest immersion |
| Numeric ID | 3441 |
| Value Type | PMTechValue |
The height of the pitch point above the deepest point of immersion at the stage is determined automatically as long as the shafts are aligned parallel to the oil level. If the shaft is at an angle to the oil level, an error occur in the calculation and a manual specification is requested.
| Both gears are immersed | ||
| One gear is immersed | ||
| Oil is sprayed directly into the mesh | Oil is not sprayed directly into the mesh |
| hc | Height of mesh point over deepest immersion point of stage |
| emax | Tooth tip depth at the design point |