Hardness conversion factor

Symbol Kτ,per
Unit -
Attribute-ID fva 888 material factor k_tauzul
Numeric ID 5823
Value Type PMDouble

The hardness conversion factor Kτ,per was derived from a detailed comparison of the calculation results of a high-quality calculation method and the results of the determination of the local material stress capacity according to Method B.

For case-hardened steels, Kτ,per assumes a value of 0.4.

Further values are not specified in ISO 6336-4.

When "Acc. to ISO 6336 Part 4“ is selected and a case-hardened material is specified, a value of Kτ,per = 0.4 is used. Alternatively, the value can be directly specified.

Source: ISO 6336-4, Section 7.1

Also see: Witzig, J.: Flank Breakage - A Limitation of the Gear Load Capacity Beyond the Material Depth, doctoral thesis, TU Munich 2012