Mean friction coefficient

Symbol µm
Unit -
Attribute-ID iso_6336_20_21_mean_friction_coefficient
Numeric ID 7682
Value Type PMDouble

The actual coefficient of friction between the tooth flanks is an instantaneous local value which depends on several properties of the oil, surface roughness, surface irregularities such as those left by machining, tooth flank materials, tangential velocities, forces at the surfaces, and the dimensions. Assessment of the instantaneous coefficient of friction is difficult since there is no method currently available for its measurement.

Therefore, the mean friction coefficient μm along the path of contact is derived from measurements and is approximated by formula (1). Although the local coefficient of friction is near zero in the pitch point C, the mean value can be approximated with the parameters at the pitch point and the oil viscosity at oil temperature.

wBt specific tooth load for scuffing
ν​∑gSC sum of tangential speeds at pitch point
ρ​relC relative radius of curvature at pitch point
XR roughness factor
XL lubricant factor

The following options are available:

  1. User specified
    Direct numerical input

  2. Acc. to ISO 6336 part 20

(ISO6336-20:2022 section 6.4 formula 25)