| Symbol | - |
|---|---|
| Unit | - |
| Attribute-ID | gear_body_clamping |
| Numeric ID | 15048 |
| Value Type | PMInteger |
The different clamping options are shown in the figure below. Heel clamping (1) is selected as the standard value for the pinion; hub clamping (0) is the standard value for the crown wheel. Another option is toe clamping (2), and options 3 to 6 represent a combination of the clamping ranges.
*The dark grey area represents the wheel body clamping area
Note: Additional clamping options are available for the special wheel body variants for differential bevel gears which are designed to meet the conditions in differentials. Clamping (7) corresponds to a side wheel; for this purpose, a plain bearing is replicated on the rear surface on the heel side and, in the case of the compensating pinion (clamping 8), on the differential bolt as well. Torque support on the compensating pinion (clamping 8) is also provided by contact with another gear wheel.
| 0 | Hub clamping |
| 1 | Heel clamping |
| 2 | Toe clamping |
| 3 | Hub and heel clamping |
| 4 | Hub and toe clamping |
| 5 | Toe and heel clamping |
| 6 | Hub, toe, and heel clamping |
| 7 | Side gear differential clamping |
| 8 | Spider gear differential clamping |
It is also possible to limit the area of heel or toe clamping. To do so, the minimum and maximum diameters must be specified (D1 and D2).