The bevel gear geometry was specified via one of the following input methods:
- According to ISO 23509 (macrogeometry only):
- The gear geometry was determined by executing the "Macrogeometry design according to ISO 23509" calculation.
- Pre-dimensioning:
- The basic geometry of the bevel gear stage was calculated using gearbox pre-dimensioning.
- Import of machine setting data:
- Machine setting data was imported using the Import Wizard. This is done when importing via the "Import machine settings" wizard and when using the "Geometry design according to ISO 23509" calculation.
- The microgeometry can be defined by the machine setting data or a 3D surface description of the tooth flanks.
- User-defined geometry data:
- The data is specified manually. (No complete consistency check is performed for the geometry data.)
- Specification of the main geometry: Hypoid offset, shaft angle, normal or face module, normal pressure angle, number of teeth, mean spiral angle of wheel and pinion, facewidth
- Specification of the tooth form data (Specification of the reference profile or implemented gearing)
- Specification of the tool data: Cutter module, cutter radius, number of blade groups, profile crowning, cutter edge radii, and protuberance