| Symbol | KHβ |
|---|---|
| Unit | - |
| Attribute-ID | iso 6336 face load factor hbeta |
| Numeric ID | 2222 |
| Value Type | PMDouble |
The face load factor KHβ describes the effect of the increase of the local load on the flank pressure due to uneven load distribution across the face width.
KHβ can be determined several different ways:
Die Bestimmung der Kraftverteilung kann mittels Messung der Fußbeanspruchung am Zahnrad, am belasteten Getriebe bei Betriebstemperatur, oder durch kritische Analyse (z.B. mittels der Ritzelkorrektur in der Workbench) erfolgen.
Uses the face load factor KHβ determined from the gear deformations based on ISO 6336:2006 part 1 Annex E. First, the shaft-bearing-system is solved, and the resulting value for KHβ is used for the calculation of the load carrying capacity.
Uses a load increase value determined from the FE calculation of the maximum pressure in the field of action. The use of this value does not comply with the procedure described in ISO 6336:2006 part 1 Annex E and is therefore purely informative.
The originally effective tooth trace deviation FβX, for example from measurements, can be specified here.
This takes into account portions of the tooth trace deviation caused by the manufacturing deviation as well as from deformation of the pinion (as with Method C2 from DIN 3990:1987 Part 1).
The requirements and simplifications for using Method C are described in ISO 6336:2006 part 1.