| Symbol | a1 |
|---|---|
| Unit | mm |
| Attribute-ID | kf_zwischen_abstand_a1 |
| Numeric ID | 4014 |
| Value Type | PMTechValue |
Distance between the hub face and the and the prismatic section of the feather key within the power flow. The value must be greater than zero and less than or equal to the key width.The attribute is relevant for the calculation of the notch factor. The following condition for the ratio between the factor a1 and the key width b must be fulfilled: 0.0 ≤ a1/b ≤ 1.0
| a0 | Axial distance between load input and output points |
| a1 | Distance between hub face and load-bearing part of the feather key |
| bN | Total width of the hub |
| c | Width of the hub with diameter D2 within the load-bearing length |
| d | Shaft diameter |
| uK | Position |
| lPF | Length of the feather key |
| ltr | Load bearing length of the feather key |
| D1 | Small external diameters for stepped hub |
| D2 | Large external diameter for stepped hub |
| BND1 | Width of the hub for D1 |
| BND2 | Width of the hub for D2 |
| Fu | Circumferential force |
| T | Torsional moment |
| - - - | Part of the feather key connection in the power flow |