Critical specific lubricant film thickness

Symbol λGFP
Unit -
Attribute-ID iso_6336_22_permissible_specific_lubricant_film_thickness
Numeric ID 4720
Value Type PMDouble

The permissible specific lubricant film thickness λGFP will be used to calculate the safety factor against micropitting Sλ.

The following options are available:

  1. User input
    Direct numerical input

  2. Acc. to Annex A
    The permissible specific lubricant film thickness was derived for mineral oils by standardized FVA-FZG micropitting tests (C-GF/8,3/90). 

    For other test conditions or different lubricants, the critical specific lubricant film thickness, λGFT, in contact point A of the specified test gears type C-GF is calculated at the reached failure load stage. The required gear geometry of the test gears type C-GF is specified in FVA-Information Sheet 54/7. In this case, the permissible specific lubricant film thickness, λGFP, is defined according to:
    λGFP = 1.4 * WW * λGFT

    An example calculation is given at ISO/TR 6336-31:2018.

  3. Acc. to Annex B
    At this method reference values are given as a guideline for the minimum permissible specific lubricant film thickness λGFP,min for mineral oils at oil temperature θoil = 60 °C, 90 °C and 120 °C as function of nominal lubricant viscosity and lubricant micro-pitting performance (quality). For other oil viscosities and temperatures the values can be interpolated.