Immersion depth

Symbol -
Unit mm
Attribute-ID immersion_depth
Numeric ID 2165
Value Type PMTechValue

The immersion depth is taken into consideration for the calculation of the bearing friction moment.

If not specified, the oil type will be set to "gear oil" and the type of lubrication will be set to "oil-air lubrication." The immersion depth of the bearing into oil is then assumed to be 0 mm.

The convention is that the oil level should be set negative from the centre of the shaft downwards (in the v-direction) and positive upwards (against the v-direction).The reference dimension for the immersion depth is the tip circle diameter of the gear (for cylindrical gears).

O Oil levelĀ  (here < 0)
E Immersion depth (here > 0)