| Symbol | KHβ |
|---|---|
| Unit | - |
| Attribute-ID | iso 6336 face load factor hbeta |
| Numeric ID | 2222 |
| Value Type | PMDouble |
The face load factor KHβ describes the effect of the increase of the local load on the flank pressure due to uneven load distribution across the face width.
KHβ can be determined several different ways:
Die Bestimmung der Kraftverteilung kann mittels Messung der Fußbeanspruchung am Zahnrad, am belasteten Getriebe bei Betriebstemperatur, oder durch kritische Analyse (z.B. mittels der Ritzelkorrektur in der Workbench) erfolgen.
Uses the face load factor KHβ determined from the gear deformations based on ISO 6336:2006 part 1 Annex E. First, the shaft-bearing-system is solved, and the resulting value for KHβ is used for the calculation of the load carrying capacity.
he KHß-value determined from the deformations in system caculation is overlaid with a tolerance range derived from the gear quality and an additional multiplication factor that can be entered at the gear unit. in the TAB "Control paramters"
The originally effective tooth trace deviation FβX, for example from measurements, can be specified here.
This takes into account portions of the tooth trace deviation caused by the manufacturing deviation as well as from deformation of the pinion (as with Method C2 from DIN 3990:1987 Part 1).
The requirements and simplifications for using Method C are described in ISO 6336:2006 part 1.