Axial force on bearing outer ring

Symbol Fr
Unit N
Attribute-ID initial load
Numeric ID 510
Value Type PMTechValue

If an axial preload of a bearing is to be defined by a preload force, the preload forces acting on the outer rings of both bearings which are braced against each other must be given with the correct sign. Only preload forces that also lead to a preload can be specified. An increase in axial clearance cannot be defined by a preload force.

sP Preload distance
FP  Preload force

Note: For adjusted bearing arrangements, the preload force must be entered with the correct sign on both bearings. A preload distance is determined from the specified preload force for the unloaded condition and is used for further calculation. The case that the spring preload distance may be used up when the spring preload is under the operating load is not considered. In this case, a separate calculation without spring preload force must be carried out.