| Symbol | KHβ-be |
|---|---|
| Unit | - |
| Attribute-ID | din3991 mounting factor K_Hbeta_be |
| Numeric ID | 233 |
| Value Type | PMDouble |
The mounting factor KHβ-be considers the influence of the deformations and thus the bearing arrangement on the load distribution in the width direction.
If optimum tooth contact has been achived in the mounted state based on a contact pattern test, the values from the table can be used for the mounting factor KHβ-be according to ISO 10300 (2014).
| Verification of contact pattern |
Mounting conditions of pinion and wheel |
||
| Contact pattern is checked | Neither member cantilever mounted |
One member cantilever mounted |
Both members cantilever mounted |
| ...for each gear set in its housing under full load | 1.0 | 1.0 | 1.0 |
| ...for each gear set under light test load | 1.05 | 1.1 | 1.25 |
| ...for a sample gear set and estimated for full load | 1.2 | 1.32 | 1.5 |
If not specified by the user, the default value of 1.1 is used.